2 in 1 hot air Rework Station YIHUA 899D+

1.Hakko heater for iron 2.Gun manual / Auto mode option 3,Two LED show gun and iron real working temperature 4,Brushless fan

2 in 1 hot air Rework Station YIHUA 899D+

 

 

 

The power of soldering iron station is 75W

Blue / Red color digital LED show gun and iron real working temperature.

The air flow and temperature with control keypad.

 

NEW Features (Energy Saving and Convenient):

Manual / Auto Switchable Operation:

 

[Hot air gun]

1. Auto mode :

When you put the hot air gun on the holder, the hot air gun will cooling to 100°C and automatic shut down.

Next time, when you take up the hot air gun, it will automatic heating up to the original temperature you have been set .

2. Manual mode:

When you put the hot air gun on the holder, the hot air gun still work as before.

 

[Soldering iron]

The blue key would set up: 2/5/10/20 minutes

1.If you set up 2 minutes, when you put the soldering iron on the holder, after 2 minutes,the soldering iron will enter the standby mode (200°C).

Next time , when you take up the soldering iron , it will automatic heating up to the original temperature you have been set .

2. If you not set up the minute that the soldering iron will keep the temperature along with your using. 

 

Technical Data:

Power consumption: 720W                         

Gun Temperature range: 100-450°C

Gun heater material: Ferro-alloys              

Gun heater resistance: 74Ω

Gun type: Brushless Fan air flow: 120L/min

Soldering Iron Temperature range: 200-450°C      

soldering Iron Type: Blue Handle

Soldering Iron Heater material: HAKKO  heater

Soldering Iron heater resistance: 3.5~4.1Ω

Gross weight: 3.15KG/pcs

Inner box Dimension(cm): 26*16.5*14.8

Outer box Dimension(cm): 57.5*36*32

QTY: 8PCS PER outer carton

     

Remark: Specifications and design subject to change without notice

*MAIN FUNCTION  

1. High-quality resistance good for long service life, low noise. 

2. Microcomputer control, warms up quickly, and so does cooling. 

3. Handle with sensor switch, the system will turn into the working mode while the handle is held; and the system will standby while the handle is put on the holder, which is very convenient and Energy Save.

4. Suitable for SOIC, CHIP, QFP, PLCC, BGA, Heating Shrink, Drying, Lacquer Removal, Ice-Out, Pre - Heating and other temperature - sensitive components.

5. Closed circuit Sensor , microcomputer zero-crossing soft touch temperature control, LED visual display , high power, rapid rise of temperature , accurate and stable temperature, little influence of air outflow, and unsoldering without lead. 

6. Be able to operate individually, work independence;LED digital display accurancy 1 °C.

7. Wind volume and temperature are adjustable , suitable for many kinds of use .

8. Using sillica gel line good for long use.

9. This product is ESD-protected and CE approved 

10. Shell using alloy material, elegant appearance; Intelligent detection and cool airflow features.

What's in the box:

* main unit + gun + power cord  

* guide   soldering iron 

* soldering iron holder 

* 3 nozzles

Product show

 

 

 

 

 

 

 

2 in 1 hot air Rework Station YIHUA 899D+