3 in 1 smd hot air Rework Station YIHUA 853DA

1.3 in 1 design,(iron,gun and DC power supply) 2.it can test mobile phone RF signal strength 3,3 digital LED display,

3 in 1 smd hot air Rework Station YIHUA 853DA

  

Technical data:

Rated voltage:  AC 220V±10% 50HZ ( 110V±10% 50HZ)

Whole machine  Power Consumption:  ≤800W

Work environment:  0-50°C

Iron parts	Gun parts	DC power supply parts
work Voltage :AC:26V±10% 50HZ	work Voltage:  AC:220V±10% 50HZ\( 110V±10% 50HZ)	work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ)
Output power:50W±10%	Output power:600W±10%	Output power:15W/30W
Temperature range:200°C-480°C	Temperature range:100°C-480°C	Output voltage:0-15V
Temperature stability:±2°C	Temperature stability:±2°C	Load stability:<0.01±2mv
Tip of ground impedance<2ohm	Gun type:Diaphragm pump Airflow is focus on it,24L~28L/Min	recovery time:<100us
Tip of ground voltage: <2mV	Gun heater resistance:90Ω	Ripple dB<1mvrms (virtual value)
Iron Heater material: Common heater	Gun heater material:Nickel-alloys	Temperature coefficient:<300PPm/°C
Iron handle:Black handle		Protection starting current:>standard value 10%

Main function:

1). Iron and gun temperature are using Intelligent Fuzzy logic PID control, therefore the temperature steady-state drift is relatively small, it overcomes the drift quite quickly even in a harsh environment.2). Fan's airflow capacity,Iron and Hot air rework's temperature are all adjustable, the power supply  voltage is shown on the LED digital display, and it is constantly updated.3). Iron, Gun and  power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures .

4). Hot air rework, soldering iron are equipped by variety of fault protection.5). Power supply part of the recovery with continuous protection and RF protection, to avoid various unexpected burning mobile the phenomenon of interference.

6). The DC power supply provides power to a mobile phone, it can also detect the RF signal's strength through the LED indicator.

What's in the box: * main unit + gun + power cord 

* guide  

* soldering iron

* soldering iron holder +gun frame+testleadest cable* 3 nozzles

These are 220V units, you may need a transformer to use the machine in your country. we also do accept special orders for 110V  / 230V/ 240V units.  

Product show

3 in 1 smd hot air Rework Station YIHUA 853DA